Armox® 370T Class 1

Rolled homogeneous armor for vehicles.

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

Rolled homogeneous armor for vehicles.

Armox® 370T Class 1 is a rolled homogeneous armor plate (RHA) that combines good resistance to penetration with excellent toughness.

Benefits of Armox® 370T Class 1 include:

  • Market-leading steel protection
  • Superior workshop properties
  • Optimized solutions
  • Expertise in ballistic protection from SSAB

Armox® 370T Class 1 is not intended for further heat treatment.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Thickness
    (mmin)
    Hardness
    (HBW)
    Yield strength Rp0.2
    (min MPaksi)
    Tensile strength Rm
    (MPaksi)
    Elongation A5
    (min %)
    Elongation A50
    (min %)
    3.0 - 3.90.118 - 0.153 380 - 430 1000145 1150 - 1350 8 8
    4.0 - 5.90.157 - 0.232 380 - 430 1000145 1150 - 1350 10 10
    6.0 - 19.90.236 - 0.783 380 - 430 1000145 1150 - 1350 10 12
    20.0 - 39.90.787 - 1.570 340 - 390 900130 1050 - 1250 11 13
    40.0 - 59.91.575 - 2.3580 300 - 350 850123 950 - 1150 12 14
    60.0 - 100.02.362 - 3.937 300 - 350
    Compare parameters

    Select one parameter to compare

    Comparison

       

      Mechanical Testing

      Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual.

      Charpy impact test according to EN ISO 148-1 on each heat and thickness from 6 mm.

      Tensile test according to EN ISO 6892-1 on each heat and thickness under 60 mm.

      Ultrasonic testing

      According to EN 10160 Class E3S3 for thicknesses up to 80 mm and E1S2 for > 80 mm.

      Impact Properties

      Hide/Show specific columns Edit
      Select columns to display
        Thickness
        (mmin)
        Min impact energy for transversal testing,
        Charpy V 10x10 mm test specimen 1)
        3.0 - 19.90.118 - 0.783 20 J / -40 °C15 ft-lbs / -40 °F
        20.0 - 100.00.787 - 3.937 40 J / -40 °C30 ft-lbs / -40 °F
        Compare parameters

        Select one parameter to compare

        Comparison

          Thickness
          (mmin)
          3.0 - 19.90.118 - 0.783
          Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          20 J / -40 °C15 ft-lbs / -40 °F
          Thickness
          (mmin)
          20.0 - 100.00.787 - 3.937
          Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          40 J / -40 °C30 ft-lbs / -40 °F

          1) Average of three tests. Transverse to rolling direction. Single value min. 70% of specified average. For plate thicknesses under 12 mm sub-size Charpy-V specimen are used. The specified minimum value is then propotional to the specimen cross-section.

          Chemical Composition (ladle analysis)

          Hide/Show specific columns Edit
          Select columns to display
            C *)
            (max %)
            Si *)
            (max %)
            Mn*)
            (max %)
            P
            (max %)
            S
            (max %)
            Cr*)
            (max %)
            Ni*)
            (max %)
            Mo*)
            (max %)
            B*)
            (max %)
            0.32 0.40 1.20 0.010 0.003 1.0 1.80 0.70 0.005
            Compare parameters

            Select one parameter to compare

            Comparison

              The steel is grain-refined. *) Intentional alloying elements.

              Tolerances

              More details are given in SSAB brochure Armox® Guarantees or on www.ssab.com.

              Thickness

              Tolerances according to Armox® Thickness Guarantees.

              Armox® Guarantees meet the requirements of EN 10029 Class C, but offers narrower tolerances.

              Length and Width

              Tolerances conform to EN 10029 or to SSAB´s standard after agreement.

              Dimensional tolerances for plate with mill edge according to special agreement. 

              Shape

              Tolerances according to EN 10029.

              Flatness

              Tolerances according to Armox® flatness guarantees, which are more restrictive than EN 10029 Class N (steel type L).

              Surface Properties

              According to EN 10163-2 Class B, Subclass 3.

              Delivery Conditions

              The delivery condition is QT (Quenched and Tempered).

              Delivery requirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com.