Armox® 560T

Download data sheet

General Product Description

High hardness armor with extraordinary toughness properties.

Armox® 560T is the world’s toughest protection plate, having nominal 560 HBW hardness, for use in vehicles, buildings and many more applications.

Benefits of Armox® 560T include: 

  • Market-leading steel protection
  • Superior workshop properties
  • Optimized solutions
  • Perfect hardness/toughness balance, for combined penetration and blast protection
  • Expertise in ballistic protection from SSAB

It offers vehicle designers new ways to increase protection using lighter weight designs.

Armox® 560T is not intended for further heat treatment.

Mechanical Properties

Thickness
(mmin)
Thickness
(mmin)
5.0 - 15.00.197 - 0.591
Hardness
(HBW)
530 - 590
Yield strength Rp0.2
(min MPaksi)
1300188
Tensile strength Rm
(MPaksi)
1650 - 2000239 - 290
Elongation A5
(min %)
7

Mechanical Testing

Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual.

Charpy impact test according to EN ISO 148 on each heat and thickness from 6 mm.

Tensile test according to EN ISO 6892 on each heat.

Ultrasonic testing

According to EN ISO 10160 Class E3S3.

Impact Properties

Thickness
(mmin)
Thickness
(mmin)
5.0 - 15.00.197 - 0.591
Min impact energy for transversal testing,
Charpy V 10x10 mm test specimen 1)
20 J / -40 °C15 ft-lbs / -40 °F

1) Average of three tests. Transverse to rolling direction. Single value min. 70% of specified average. For plate thicknesses under 12 mm sub-size Charpy-V specimen are used. The specified minimum value is then propotional to the specimen cross-section.

Chemical Composition (ladle analysis)

C *)
(max %)
C *)
(max %)
0.37
Si *)
(max %)
0.70
Mn*)
(max %)
1.00
P
(max %)
0.010
S
(max %)
0.003
Cr*)
(max %)
1.0
Ni*)
(max %)
1.80
Mo*)
(max %)
0.50
B*)
(max %)
0.005

The steel is grain-refined. *) Intentional alloying elements.

Tolerances

More details are given in SSAB brochure Armox® Guarantees or on www.ssab.com.

Thickness

Tolerances according to Armox® Thickness Guarantees.

Armox® Guarantees meet the requirements of EN 10029 Class C, but offers narrower tolerances.

Length and Width

Tolerances conform to EN 10029 or to SSAB´s standard after agreement.

Dimensional tolerances for plate with mill edge according to special agreement. 

Shape

Tolerances according to EN 10029.

Flatness

Tolerances according to Armox® flatness guarantees, which are more restrictive than EN 10029 Class N (steel type L).

Surface Properties

According to EN 10163-2 Class B, Subclass 3.

Delivery Conditions

The delivery condition is QT (Quenched and Tempered).

Delivery requirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com.