Hardox® HiTemp is a high-heat grade of Hardox® wear plate. It provides a cost-efficient solution for wear resistance at high temperatures up to 500°C (930°F) with a nominal hardness of 400 HBW. When traditional quenched and tempered wear-resistant steels lose hardness at higher temperatures, Hardox® HiTemp steel still delivers high wear resistance.
Get technical adviceDownload data sheet
If you need to build heavy equipment that can fight wear in tough, high-temperature applications, take a look at Hardox® HiTemp wear resistant steel. While traditional Q&T wear-resistant steels experience a loss of hardness at temperatures of 300-500°C (about 570-930°F), this high temp metal stays strong and hard to improve performance and extend the service life of costly equipment.
The outstanding performance of this heat resistant material is achieved by using high-quality raw material combined with a carefully controlled manufacturing process. And in your workshop, Hardox® HiTemp can be cut, welded, machined and cold formed using the same kind of machinery as other Hardox® grades and conventional AR steel.
Abrasive and hot materials like slag – leftover waste from metal smelting or refining with a highly angular shape and rough surface texture – are no match for high-temperature, high-strength Hardox® HiTemp in truck bodies. With a redesigned body using a thinner plate in the body’s flooring and sides, you can get more payload when the truck is fully loaded. Plus, the thinner plate lowers the overall weight of the truck when it travels empty.
In coking plant equipment, Hardox® HiTemp provides a cost-effective, long-lasting solution in coke ramps, quenching wagons, cooling beds, slag tippers, furnace inlet scrapers and other heat-affected equipment. In short, Hardox® HiTemp makes a great choice wherever you need optimal wear resistance and high structural strength.
Altus in Singapore saved 40% weight or 2.236 kg (4,930 lbs) by switching from 25 mm (0.984”) mild steel to 10 mm (0.394”) Hardox® HiTemp in the slag dumper’s floor and from 12.7 (0.5”) to 10 mm (0.394”) in the sides.
When hit by 1.000 °C (1.832°F) coke, Hardox® HiTemp is up to the challenge. By replacing ceramic tiles, which are costly and prone to cracking, with steel plates of Hardox® HiTemp, SSAB Oxelösund in Sweden could reduce maintenance costs drastically and create a safer working environment.
Hardox® HiTemp is one of the best steels for high temperature applications involving moderate wear, especially in process industries like steel, cement, asphalt, coal power or recycling. Applications for this high temp metal include:
Hardox® HiTemp can provide advantages over other materials like heat resistant ceramics or mild steel. For example, coke ramps made in thick basalt ceramic tiles are incredibly expensive, plus prone to cracking. This means more maintenance stops and money-wasting downtime. But with Hardox® HiTemp, you get a wear resistant steel that weighs less, yet stays strong and lasts long. And because of its workshop-friendly properties, you’ll have a quick and easy installation compared with materials like heat resistant ceramics that are common in high-temperature environments.
1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface for plate. At least one test specimen per heat and 40 tons.
The nominal material thickness will not deviate more than ± 15 mm from that of the test specimen.
1) Impact toughness measured upon agreement. Impact testing according to ISO EN 148 per heat and thickness group. Average of three test.
The steel is grain refined. *) Intentional alloying elements.
Tolerances according to Hardox® Thickness Guarantees.
Hardox® Guarantees meet the requirements of EN 10029 Class A, but offer more narrow tolerances.
According to SSAB’s dimension program.
Tolerances according to SSAB´s mill edge standards or tolerances that conform to EN 10029.
Tolerances according to EN 10029.
Tolerances according to Hardox® Flatness Guarantees Class C, which are more restrictive than EN 10029 class N.
According to EN 10163-2 Class A, Subclass 1.
The delivery condition is QT (Quenched and Tempered). The plates are delivered with sheared or thermally cut edges. Untrimmed mill edges are available by agreement.
Welding, bending and machining
Recommendations can be found in SSABs brochures at www.hardox.com or consult Tech Support.
Bendability according to Hardox® Bending Guarantees Class F.
Hardox® HiTemp is not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 500oC.
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.
