GreenCoat RWS Pro color coated steel for rainwater systems

General Product Description

GreenCoat RWS Pro color coated steel is available in regular finish and offers a wide range of colors inspired by Nordic nature.

GreenCoat RWS Pro offers a high level of durability for rainwater systems using a double-sided coating (same coating is applied on both sides of the sheet).

GreenCoat RWS Pro color coated steel is optimized for weather and wear resistance. It provides good protection against corrosion (RC5) and mechanical abrasion as well as very good gloss retention and color fastness. GreenCoat RWS Pro possesses excellent forming properties enabling very demanding folding even down to -15°C, allowing for year round installation at lower costs.

Excellent weather resistance together with regular maintenance and the cleaning of rainwater systems can maximize the service life of the product.

GreenCoat RWS Pro complies with current REACH regulations and is fully chromate-free.

SSAB’s color coated steels are all manufactured according to EN 10169.

Technical Properties

Hide/Show specific columns Edit

Select columns to display

Technical Properties	Regular
Gloss	40
Minimum inner bending radius	0.5 x sheet thickness
Scratch resistance	30 N
Lowest forming temperature	-15 °C
UV radiation resistance	R_UV3
Corrosion resistance ¹⁾	RC5
Stain resistance	Very good
Highest operating temperature	100 °C
Coating thickness, nominal (primer + top coat)	35 µm
Coating structure	Structured
Steel designation ²⁾	FAX, PLX ³⁾
Zinc coating	275 g/m²
Min steel thickness ²⁾	0.50 mm
Steel width ²⁾	1000 - 1500 mm

Compare parameters

Select one parameter to compare

Regular

Technical Properties

Gloss

Regular

40

Technical Properties

Minimum inner bending radius

Regular

0.5 x sheet thickness

Technical Properties

Scratch resistance

Regular

30 N

Technical Properties

Lowest forming temperature

Regular

-15 °C

Technical Properties

UV radiation resistance

Regular

R_UV3

Technical Properties

Corrosion resistance ¹⁾

Regular

RC5

Technical Properties

Stain resistance

Regular

Very good

Technical Properties

Highest operating temperature

Regular

100 °C

Technical Properties

Coating thickness, nominal (primer + top coat)

Regular

35 µm

Technical Properties

Coating structure

Regular

Structured

Technical Properties

Steel designation ²⁾

Regular

FAX, PLX ³⁾

Technical Properties

Zinc coating

Regular

275 g/m²

Technical Properties

Min steel thickness ²⁾

Regular

0.50 mm

Technical Properties

Steel width ²⁾

Regular

1000 - 1500 mm

¹⁾ Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.

²⁾ Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.

³⁾ FAX fulfills the requirements of EN 10346 DX51D, PLX fulfills the requirements of EN 10346 DX54D.

Colors

Below are the colors currently available. Other colors can be agreed upon separately.

Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.

18 Available Colors

The product especially in metallic colors may have slight tonal difference between batches and especially if the time of production differs significantly.

Reverse Side Coating

Same coating is applied on both sides of the sheet.

The technical properties apply for both sides. However, different sides of the sheet cannot be mixed due to the possibility of a visual difference. The reverse side may show wider variation in color and gloss.

Reverse side stamping is not applicable for double sided products.

Contact Information

www.ssab.com/contact

Get datasheet by email

General Product Description

Technical Properties

Select one parameter to compare

Comparison

Colors

18 Available Colors

Reverse Side Coating

Contact Information