SSAB Domex® 220LA

Download data sheet

Select Language

General Product Description

SSAB Domex 220LA is a high-strength, low-alloy steel intended for general presswork, bending and forming. SSAB Domex 220LA offers consistent properties that assist modern, rapid production methods.

Dimension Range

SSAB Domex 220LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm as coils, slit coils and as cut to length in lengths up to 8.5 meters.

Mechanical Properties

Yield strength R_eL (MPa)	Tensile strength R_m (MPa)	Elongation A₈₀ (min %)	Min. inner bending radius for a 90° bend¹⁾ (x t)
220 - 290	330 - 400	30	0.0

Yield strength R_eL
(MPa)

220 - 290

Tensile strength R_m
(MPa)

330 - 400

Elongation A₈₀
(min %)

Min. inner bending radius for a 90° bend¹⁾
(x t)

0.0

The mechanical properties are tested in the transversal direction.
Bending properties for both longitudinal and transversal direction.

¹⁾ t = Sheet thickness.

Chemical Composition (ladle analysis)

C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Al (min %)	Nb+Ti (max %)
0.10	0.040	0.90	0.030	0.025	0.015	0.10

C
(max %)

0.10

Si
(max %)

0.040

Mn
(max %)

0.90

P
(max %)

0.030

S
(max %)

0.025

Al
(min %)

0.015

Nb+Ti
(max %)

0.10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance to EN 10131. Narrower tolerances are available upon request.

Delivery Conditions

Cold Rolled.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.