SSAB Laser® 250C

Download data sheet

General Product Description

SSAB Laser® 250C is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.

SSAB Laser® 250C meets and exceeds the requirements of S235J2C+N in EN 10025-2. Dual certification and CE marking are available upon request.

Dimension Range

Delivery form
Delivery form
Hot rolled sheet as rolled
Thickness
(mmin)
2.0 - 15.00.079 - 0.591
Width
(mmin)
1000 - 186039.37 - 73.23
Length
(mmin)
1000 - 1600039.37 - 629.92
Delivery form
Delivery form
Hot rolled sheet pickled and oiled
Thickness
(mmin)
2.0 - 15.00.079 - 0.591
Width
(mmin)
1000 - 183039.37 - 72.05
Length
(mmin)
1000 - 1600039.37 - 629.92
Delivery form
Delivery form
Hot rolled plate as rolled
Thickness
(mmin)
6.0 - 30.00.24 - 1.18
Width
(mmin)
1000 - 330039.37 - 129.9
Length
(mmin)
2000 - 1500078.74 - 590.55

Mechanical Properties

Delivery form
Delivery form
Hot rolled sheet
Thickness
(mmin)
2.0 - 15.00.079 - 0.591
Yield strength Re
(min MPa)
240
Tensile strength Rm
(MPa)
360 - 460
Elongation A80 1)
(min %)
23
Elongation A5 2)
(min %)
30
Min. inner bending radius 90° t ≤ 6mm 3)
(x t)
0.5
Min. inner bending radius 90° t ˃ 6mm 3)
(x t)
0.7
Delivery form
Delivery form
Hot rolled plate
Thickness
(mmin)
6.0 - 30.00.24 - 1.18
Yield strength Re
(min MPa)
240
Tensile strength Rm
(MPa)
360 - 460
Elongation A80 1)
(min %)
Elongation A5 2)
(min %)
29
Min. inner bending radius 90° t ≤ 6mm 3)
(x t)
1.0
Min. inner bending radius 90° t ˃ 6mm 3)
(x t)
1.0

The mechanical properties are tested transverse to the direction of rolling.

1) A80 value applies for thicknesses < 3.00 mm.

2) A5 value applies for thicknesses ≥ 3.00 mm.

3) The bending guarantee is valid for both longitudinal and transverse direction.

Impact Properties

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
40 J / -20 °C
Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

Chemical Composition (heat analysis)

C
(max %)
C
(max %)
0.12
Si
(max %)
0.03
Mn
(max %)
1.3
P
(max %)
0.020
S
(max %)
0.020
CEV
(max )
0.30

All SSAB Laser® steels are aluminum-killed (Al ≥ 0.015%) and grain-refined. Additionally, niobium (Nb), vanadium (V), titanium (Ti) and/or boron (B) may be used as single alloying element or in any combination.

Tolerances

All SSAB Laser® products are delivered with SSAB Laser® tolerances, which means increased guarantees compared to corresponding EN standards. Detailed information is available on ssab.com.

Thickness

Hot rolled sheet: SSAB Laser® tolerances correspond to 2/3 of EN 10051 as default. Tighter tolerances are available upon request.

Hot rolled plate: SSAB Laser® tolerances correspond to 3/4 of EN 10029 as default.

Width

Hot rolled sheet: -0/+20 mm for mill edge sheet; -0/+2 mm for cut edge sheet. Tighter tolerances are available upon request.

Hot rolled plate: -0/+4-10mm depending on the thickness.

Length

Hot rolled sheet:

Nominal length
(mm)
Nominal length
(mm)
l ≤ 4000
Tolerance
(mmin)
- 0 / + 3- 0 / + 0.1
Nominal length
(mm)
Nominal length
(mm)
4000 ˂ l ≤ 6000
Tolerance
(mmin)
- 0 / + 4- 0 / + 0.2
Nominal length
(mm)
Nominal length
(mm)
6000 ˂ l ≤ 8000
Tolerance
(mmin)
- 0 / + 5- 0 / + 0.2
Nominal length
(mm)
Nominal length
(mm)
8000 ˂ l ≤ 13000
Tolerance
(mmin)
- 0 / + 6- 0 / + 0.2
Nominal length
(mm)
Nominal length
(mm)
13000 ˂ l ≤ 16000
Tolerance
(mmin)
- 0 / + 8- 0 / + 0.3

Hot rolled plate:

Nominal length
(mm)
Nominal length
(mm)
2000 ˂ l ≤ 10000
Tolerance
(mm)
- 0 / + 15
Nominal length
(mm)
Nominal length
(mm)
10000 ˂ l ≤ 15000
Tolerance
(mm)
- 0 / + 20

Shape

Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.

Flatness

Hot rolled sheet: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

Hot rolled plate: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Delivery Conditions

Normalized rolled.

Surface and edge condition

Hot rolled sheet: as rolled or pickled and oiled surface condition with mill edge. Cut edge is available upon request.

Hot rolled plate: as rolled surface condition and cut edges as default.

Fabrication and Other Recommendations

All SSAB Laser® products have been optimized for laser cutting, cold forming and welding.

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Contact Information

www.ssab.com/contact