Strenx® Tube 900MH is an HF-welded cold-formed structural hollow section made of hot-rolled high-strength steel with a minimum yield strength of 900 MPa.
Its high strength combined with naturally stiff form of welded hollow section enables construction of stronger and lighter structures. Strenx® Tube 900MH meets or exceeds the requirements of EN 10219-3 (2020). Typical applications include load-bearing structures in the lifting, handling and transportation segments.
Strenx® Tube 900MH is available in circular, square and rectangular shapes. Other shapes and sizes are available upon request.
The maximum length of the tubes is 12-18 meters, depending on the size. Longer or cut-to-length tubes are available upon request.
It is not recommended to hot dip galvanize Strenx Tube 900MH hollow sections.
Other shapes and sizes are available upon request.
Strenx® Tube 900MH
1) The hollow sections with D/T < 15 (round) or (B + H)/2T < 12,5 (rectangular and square), the minimum value of elongation is reduced by 2.
The mechanical properties for rectangular hollow sections are tested by SSAB on the longer side of the cross section.
Mechanical properties meet the requirements of EN 10219-3 (2020).
1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6 mm. The specified minimum value corresponds to a full-size specimen.
1) Sum of Nb, V and Ti = max 0.22%
Chemical composition meets or exceeds the requirements of EN 10219-3 (2020).
In addition, boron (B), molybdenum (Mo), nickel (Ni) or copper (Cu) may be used as alloying elements either singly or in combination.
The steel is grain refined.1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
The tubes are cold formed and high frequency welded from thermomechanically rolled steel.
Show specs in: