Advanced high-strength steels in cars are grades that meet a minimum tensile strength of 440 MPa (64 ksi or 64,000 psi), according to the WorldAutoSteel, the automotive industry association of AHSS steel manufacturers. To greatly oversimplify, all AHSS steels achieve their high strength by steel producers precisely controlling their chemistries and their heating and cooling rates.
Some of the most popular metallurgical types of advanced steels capable of achieving AHSS tensile strengths include:
Historically, advanced high-strength steels were classified by their metallurgical type and minimum tensile strength. For example, M1200 for martensitic with a minimum TS of 1200 MPa. For the sake of simplicity during informal discussions, strength numbers can be “rounded up”.
To determine a specific grade’s actual value, look at its full steel grade name: for example, “CR290Y490T-DP” describes a DP500 steel with an actual minimum tensile strength of 490 MPa (the “490T”), as well as its minimum yield strength of 290 MPa (the “290Y”).
In any case, automakers buy advanced steels to meet either their own custom AHSS specifications, or specific national or international AHSS standards, and they clearly delineate the AHSS properties, including the minimum yield and tensile strengths.
Also note that AHSS steels’ predecessor – high-strength, low-alloy steels (or HSLA) – used designations, for example HSLA 430, that referenced the grade’s minimum yield strength and not its tensile strength.
An additional nomenclature consideration is that HSLA steels (which are sometimes further abbreviated to just “LA” in their product names) have progressed to the point where their minimum tensile strengths exceed the 440 MPa level, qualifying them for the AHSS designation.
Docol® AHSS/UHSS steels are especially developed for the automotive industry. But if you’re designing lifts, trailers, agricultural or other similar equipment requiring advanced high strength structural steel, check out Strenx® performance steel from SSAB.
OEM specific
Customized advanced and ultra-high strength steels for your specific automotive applications.
Custom AHSS for automotive OEMsThe newest AHSS steels, including 3rd generation AHSS steels, don’t always fit the existing metallurgical categories. Some new grades have characteristics from multiple traditional metallurgical categories. Or the new steels don’t fit neatly into the current international standards’ definitions of metallurgical categories.
To counter this, some steelmakers are coming up with new AHSS designations based on AHSS properties such as formability or usability, such as High Edge (HE) ductility or Dual Phase with High Formability.
Another change in AHSS terminology is the increased use of the phase “ultra-high strength steel”. UHSS has become useful shorthand to mean AHSS steels that have (depending on who you’re speaking to) two or three times higher minimum tensile strength levels than the original AHSS level of 440 MPa.
Visit our ultra high strength steel page to learn about the highest strength steels, as well as how AHSS/UHSS steels in general can make your vehicles stronger, lighter, safer, and more sustainable.
Ultra-high strength steels (UHSS) in cars are simply advanced high-strength steels (AHSS) with significantly higher minimum tensile strengths. Viewed another way, UHSS (aka “ultra-high tensile steels”) are a subset of the boarder category of AHSS steels.
Read more
From your design concept to prototyping and then mass production, fully leverage our resources and expertise to assure an efficient development of your AHSS/UHSS automotive components.
Read more